is reader supported. We may earn a small affiliate commission if you buy through our recommended links.

How To Change 2h To 4h Jeep Wrangler

Have you ⁣ever wished your trusty 2-door ⁣Jeep Wrangler had a little more room for your precious cargo? Well, fear not, because‍ we ⁢have the solution for you! In this article, we will walk you through the step-by-step process of transforming your 2-door Jeep Wrangler into a spacious 4-door ride.⁤ Say goodbye to⁢ cramped quarters and hello to adventure-ready comfort! Let’s dive in and explore how ‌you can make the switch from 2H to 4H a reality.

Table of ​Contents


To change a 2h to 4h Jeep Wrangler, you will need to follow a few simple steps. First, make sure you​ have all the necessary tools ⁤and parts, including a lift kit, larger tires, and possibly new suspension components. Next, carefully lift the Jeep using a jack and secure it on jack stands to ensure safety during the installation ‍process.

Once the Jeep is securely lifted, begin by removing the existing ⁣suspension components, such‌ as the shocks and springs. ‍Replace these components​ with the new parts included in the lift kit, following‌ the manufacturer’s​ instructions⁤ carefully. It may also be‌ necessary to install larger​ tires to accommodate‍ the increased ride height from⁣ the lift kit.

After installing the lift kit and any additional components, lower the Jeep back down to the⁤ ground and take it for a test drive to ensure everything is functioning properly. Make any‌ necessary adjustments to the suspension or alignment to fine-tune‍ the ride quality and handling of your newly lifted Jeep​ Wrangler. With a little time and effort, you can successfully ​change a 2h to 4h Jeep Wrangler and enjoy the⁢ benefits of additional ground clearance and off-road capability.

Tools Required for the Conversion

To successfully convert a 2h to 4h Jeep Wrangler, you will need a variety of tools to complete the task efficiently. Having the right tools will ensure that the conversion process goes smoothly and⁣ that you achieve the desired result. Below is a list of​ essential :

  • Socket Set: A quality socket set with ‌a variety of sizes will be needed​ to remove and‌ install various parts during the conversion process.
  • Jack‌ and Jack Stands: These ​tools ⁤are essential for lifting the vehicle off the ground safely to⁣ access⁢ the transfer case and​ other ⁣components.
  • Torque Wrench: A torque wrench is necessary for tightening bolts to the manufacturer’s specifications to ⁢ensure a secure⁣ fit.
  • Screwdrivers: Both flathead and Phillips screwdrivers will ‍be needed to remove and reinstall screws in various parts of the vehicle.

In addition to ⁤the tools mentioned above, you may also need the‍ following items to⁤ successfully convert your Jeep Wrangler from 2h to 4h:

  • Transfer Case⁣ Shift ‍Linkage: ‌This part is essential for switching between 2h and 4h modes and should be compatible with⁢ your specific Jeep model.
  • Transfer Case Skid Plate: A transfer case skid plate will ⁤help protect the transfer case from damage when off-roading in 4h mode.

Remember to⁤ follow the manufacturer’s instructions and guidelines when using these tools to ensure a safe and successful conversion process. ‍With the right ⁢tools and⁣ a little bit of know-how, you can easily change your Jeep Wrangler from 2h‍ to 4h mode and⁣ enjoy enhanced off-road capabilities.
Step-by-Step Guide to​ Changing 2h to 4h

Step-by-Step⁣ Guide to Changing 2h to 4h

To change your 2h to 4h on your Jeep Wrangler, follow these simple‌ steps:

First, ensure your vehicle is in park and the emergency‌ brake is engaged. Next, locate the transfer case lever in your Jeep Wrangler. This lever‍ is typically located on the floor between the driver and passenger seats.

Once you have located the transfer case lever, shift it from 2h​ to 4h by pushing or pulling the lever as indicated ​on the shift pattern diagram. Make ‍sure ⁤to refer to your owner’s manual for specific instructions ⁢on how to‍ engage 4h in your particular model of​ Jeep Wrangler.

After shifting to 4h, test​ the ‍new setting ‍by driving ‌your Jeep ⁣Wrangler ‌in a safe and open area. Pay‍ attention to how the vehicle handles and make any necessary adjustments to⁢ ensure⁣ a smooth transition ‍from 2h to 4h. Remember‌ to always follow proper safety precautions when driving off-road.

Step Description
1 Engage park⁤ and emergency brake
2 Locate ​transfer‌ case lever
3 Shift from 2h to 4h
4 Test drive in open area

Considerations and Precautions

When changing ⁣your Jeep Wrangler from 2h to 4h,⁤ there are several ‍ to keep in mind to ensure a smooth ​and successful transition. One important factor to consider is⁢ the compatibility of your vehicle with the new 4h system. Make sure to ⁤check your Jeep’s specifications ⁤and consult with a professional if needed.

It is crucial to have the necessary tools and equipment on hand before starting‍ the⁤ conversion process. This ⁤includes items such as a jack, ​wrenches, and​ any specific ⁤components needed ‍for the 4h conversion. Having everything prepared in advance​ will help streamline the process and prevent⁤ any delays ⁣or complications.

During the conversion process, ‍it is important⁤ to work carefully⁢ and methodically to avoid ‌damaging any parts of ⁣your Jeep. Take your time to ⁢follow the manufacturer’s instructions or ‍consult with a mechanic to ensure that each step is done correctly. By taking these precautions, ⁤you can successfully change your Jeep Wrangler from 2h to‌ 4h without any issues.

Testing⁢ and Maintenance

To change the transfer case on your Jeep Wrangler from 2h to 4h, you will need to follow a few simple steps. First, make sure your vehicle is on a level surface and in park. Next, engage the parking brake to⁣ prevent any movement while you ⁣work on the transfer case.

After ensuring the vehicle is secure, ​crawl underneath the Jeep and locate the transfer case. Use a⁤ wrench to loosen the bolts holding the transfer‍ case in place. Carefully remove the transfer case and set it aside.⁢

Next, install the new transfer case in the same location as the old one. Make sure it is securely fastened with‌ the bolts. Double-check all connections and bolts ​before lowering the vehicle back down. Once everything is secure, test the new transfer case by ⁣engaging 4h​ and driving the Jeep to ensure proper functionality.

Tip 1: Make sure to use the correct tools⁣ for⁣ the job.
Tip 2: Consult your vehicle manual for specific instructions.
Tip 3: Seek assistance from a professional if needed.


In , transforming a 2h Jeep Wrangler into a 4h one requires careful planning and execution. ‌By following the steps outlined in this guide, Jeep owners can successfully upgrade their vehicle’s suspension system to achieve enhanced off-road capabilities. It is​ essential‌ to invest in high-quality lift kits, shocks, and other necessary components to ensure​ a smooth and safe transition to a higher lift⁤ height.

Additionally,​ conducting thorough research and consulting ⁤with⁢ experienced mechanics or off-roading ​enthusiasts can provide valuable insights and recommendations throughout the modification process. Jeep enthusiasts should also consider the potential impact of the lift ⁤kit on the vehicle’s overall performance, including handling, ride comfort, and fuel efficiency. Regular maintenance and inspections are crucial to maintaining the ⁤Jeep Wrangler’s reliability and ⁣performance after the lift kit installation.

with ⁣dedication and ⁢attention to detail, Jeep owners⁢ can⁤ successfully ⁢upgrade their 2h Jeep Wrangler ‍to a 4h one, allowing⁢ for greater off-road adventures and exploration. Remember to prioritize safety, quality components, ⁣and expert advice to ensure a seamless ⁣and successful transformation of your beloved Jeep Wrangler.

Frequently Asked Questions

Q: Can I change my 2h‍ Jeep Wrangler to a​ 4h?

A: Yes, it is⁣ possible ⁣to change your 2h Jeep Wrangler to a 4h.

Q: What is ‌the benefit⁢ of changing from 2h to 4h in a Jeep Wrangler?

A: Changing from 2h to 4h in a Jeep Wrangler gives you increased traction and driveability in off-road or slippery conditions.

Q: How difficult is it to make this conversion?

A: ⁤The conversion process ⁢can vary in difficulty depending on your level ‌of ‌mechanical skill and experience. It is recommended to consult⁣ with​ a professional mechanic to ensure ‍it is done correctly.

Q: What are⁤ the steps involved in changing from 2h to 4h in a Jeep Wrangler?

A: The steps involved in changing from 2h ⁤to⁢ 4h in a Jeep ‌Wrangler typically include adjusting the transfer case and front axle, as well as ⁢potentially installing⁢ new components to ‍accommodate the change.

Q: Is it worth the cost to make this conversion?

A: The cost of making this⁢ conversion ⁤can vary depending on the specific components needed and ⁢the labor⁣ involved. Ultimately, the decision on whether it ‍is worth ​the cost will depend on your specific needs and preferences for your Jeep Wrangler.

In Retrospect

converting your 2h Jeep Wrangler to a 4h can ​be a rewarding project for any off-road enthusiast looking to enhance their vehicle’s capabilities. By following the steps outlined in this ⁣article, you can elevate your driving ‌experience and tackle more ‌challenging terrains with confidence. Remember to take your time, gather the necessary tools and materials, and seek professional assistance if ‌needed.​ With dedication and patience,‌ you’ll ​be cruising in your newly upgraded 4h Jeep Wrangler in no time. Happy off-roading!

Similar Posts